How to flash stock ROM/unbrick through PC (SP Tool Method)
Credits_ MD Rajaul
All his works HERE
Backup all data and nvram. All data and settings will be lost. Your phone will be exactly like it was when booted first..
( Comment below if you need help for backing up).
Disclaimer: Please do it at your own risk, We are no way responsible if anything goes wrong or you ruin /brick your phone.
1.Install both the drivers(windows 7 preferable)(It should be successfully installed all drivers)2.Download sp flashtool and stock rom and extract them using any zip extractor
3.Open SP FLASH Tool.
3.Open SP flashtool
4.Click Scatter Loading then select scatter file from downloaded stock ROM
5.Click on download -> switch off your phone and connect to PC
6.Wait till below green popup appears
7.Now disconnect your phone & reboot.It will stuck on Fastmmi mode written “up down” on screen.
8.Download minimal ADBtool and extract on your desktop.Install that.
9.Connect your device to the computer.
10.Open the adb tool just installed and check device is listed or not by
” adb devices ” command.
11.Give this command “adb shell fctest system reboot”
12.Now phone is switched on,do the onscreen settings.